200A and 202 reproduction
frames back
in stock.

hikerduane
A couple parts I don't know the brand of.
Coleman Q70 mixing chamber, valve?
Heavy duty burner.
Strange lantern.
More stuff to see what they go to.
Duane
IMG_6235_opt.jpg 
IMG_6234_opt.jpg 
IMG_6233_opt.jpg 

IMG_6236_opt.jpg 
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
MartyJ
Duane, I believe the third one down is a Thomas Kerosafe.  I picked up one with a bad fount recently. It is on the Terry Marsh site,
Marty
Quote
hikerduane
Thanks Marty.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
rob_pontius
The valve looks to be a Leacock for use with an R55 generator.
Quote
SteveRetherford
this looks like canadian coleman lamp mixing chamber to me , found on some of the smaller lamps . i have some here like it . even have a few like it made from aluminum .

IMG_6235_opt.jpg
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
dbosch
the valve is a Canadian 159 lamp valve.  The lamp is an AGM for Sears Mdl 07703
Dan B.  ICCC #100
The Texas Dust Bowl

Faith is not about everything turning out okay; faith is about being okay no matter how things turn out.
Quote
mgmlvks
2nd down is Amish Valve.  Early ones set up for R55, later for 220 with eblock

pic below is R55 version
[49786027408_cc0d157918_z]
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote
mgmlvks
this looks like canadian coleman lamp mixing chamber to me , found on some of the smaller lamps . i have some here like it . even have a few like it made from aluminum .

IMG_6235_opt.jpg


I saw a correlation with the notched mixing chambers and having the internal air restriction staked inside the air tube .  Could not get anyone else on board on that.  Trying to find the post
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote
Macburner
[IMG_6236_opt]
Sear kerosene model 07703 from 1936. They do look like AGM model 110 but the handle is shorter and they don't have a pricker control built into the valve block. ::Neil::

Pluralitas non est ponenda sine neccesitate

 Author-The Pressure Lamp Catalogue (PLC).

Neil A. McRae. ICCC #306. Director International Guild of Lamp Researchers Ltd.

Quote
hikerduane
Thank you, I'll have to tag these.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
Doug L

AGM kero.

I have the same one

looking for a Hugo Moller Comet  Stove 5 or 6

 

Quote
hikerduane
I didn't examine these closely when I removed them from the box, just set them on the shelving I made room on.  I'll have to see if it has any markings.
Duane 
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
hikerduane
Per T Marsh site, setup is for kero or gas, with detents on upper air tube, lamp was mislabeled as having Q70 burner.  Second item misidentified by auction I received so far.  Hope I have a genny for it or can figure out which one.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.