200A and 202 reproduction
frames back
in stock.

hikerduane
I got a big, green shade from a member here, but a 10" shade holder I picked up holds the shade above the mantles and I would like to rig up something or find a holder that is actually the opposite direction, holding the heavy globe lower.  Ever see one or do I have to take one of those 10" holders apart and reattach the parts?
What I found has a brass colored holder, circle in the center with spokes radiating out with a ring holding those in place that the shade rim fits in. I could grind off the ends of the spokes and move them to the other side and peen over the ends to keep them in place.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
SteveRetherford
a pic would help ?
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
10gage
What lamp are you mounting to?
James sizemore
milspec syndicate #1941
slant savers #68
quicklite crew#43
Quote
hikerduane
Here is what I have, didn't notice it was bent and cracked, but still sturdy.  The shade lower rim sets on the outer edge, but if the holder is turned over, there is no place for the shade to set stable.  A CQ holder will fit into the top of my glass shade/globe, but is too high then, the mantles will blind you on my Thomas Kerosafe lamp.  First photo shows how the holder is oriented.
Duane
20200904_125410_opt.jpg 
20200904_125435_opt.jpg 
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
Hot Diggity
You can't mount under the valve like a Leacock 107?
Double light-up for Matt
I think I can see where you're going with this, but I wonder what other sorts of troubles it could cause.
Chuck, 3/61, ICCC 1689
Milspec Syndicate #510
Coleman 275 Appreciation Syndicate #0510
Coleman Quick Lite Crew #12
BernzOmatic Appreciation Club #510
Coleman Slant Saver #510
Frank Appreciation Syndicate Member #2
Tinker, Toy maker, Trash picker, Wickie, Lamp loon
Quote
Hot Diggity
I see one picture of a Thomas Kerosafe that has what may be the original shade holders.  They look like droopy Coleman globe holders.  I'll have to dig this one up in the PLC when I get home and see what the original shade arrangement looked like.

I like the upside ring idea now Duane, now that I see the lamp.  I think I'd make the legs a little stouter that the stuff that's on it now.  Interesting idea.
Chuck, 3/61, ICCC 1689
Milspec Syndicate #510
Coleman 275 Appreciation Syndicate #0510
Coleman Quick Lite Crew #12
BernzOmatic Appreciation Club #510
Coleman Slant Saver #510
Frank Appreciation Syndicate Member #2
Tinker, Toy maker, Trash picker, Wickie, Lamp loon
Quote
SteveRetherford
thats made for a wicky lamp Duane .
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
Hot Diggity
I could build you a CQ style holder in stainless with a raised center if that'd be easier.
Chuck, 3/61, ICCC 1689
Milspec Syndicate #510
Coleman 275 Appreciation Syndicate #0510
Coleman Quick Lite Crew #12
BernzOmatic Appreciation Club #510
Coleman Slant Saver #510
Frank Appreciation Syndicate Member #2
Tinker, Toy maker, Trash picker, Wickie, Lamp loon
Quote
SteveRetherford
lets see the lamp your putting it on ?
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
hikerduane
Played around, my solder skills aren't too great.  Forgot, I had played with the holder a little the other day and reversing wasn't enough.  Didn't want to bother anyone with a custom holder, it needs to stabilize on the air tubes or...........
Attach under the "U" burner holder.  I can compensate how far the genny pokes into the air tubes by bending the burner holder.  Hot Diggity has a good thought.  Burnt one finger with my misaimed  torch.
Duane
IMG_6389_opt.jpg 
IMG_6390_opt.jpg 
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
Whitegas Extraordinaire
Duane
That shade will fit on a typical Coleman shade holder attached to the burner.
It fits nice, nice!
I frighten easily!

My current shade is Coleman!!

To me a lamp without a shade is creepy!

ICCC # 1865

Quote
Rfieldbuilds
Beautiful shade.  I like those green tam o shanters. I had one of those holders and gave it to another collector.  I believe I have one more somewhere but Dont think it would be right height you need.  In fact, dont even know where it is in storage.  Looks like you got it solved for now anyways.  
Randy
QL #15, Slant Saver #59, #0269 Turd Hurdler, #0269 Mil Spec Syndicate, Coleman Blues 243 #0269, BernzOmatic Appreciation Club #072, and a few others too.
Quote
hikerduane
Since the Kerosafe was so bright on CF, I thought a dark shade would be best on it.  I did manage today to stuff a CQ holder into this shade.  The hole for a stud in the top of the burner is a little enlarged or the stud is, so things gotta be secure.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
Rubing
I have all of my lamp shades packed up for our upcoming move but I have a similar shade holder as Chuck’s on a Leacock bracket lamp that works great. 
ICCC # 1402
Quote
hikerduane
I think that type would work, I have a washer under the support at the moment.  What I bought was more to see what I might need as shades and holders are new to me.
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
hikerduane
I have a large white shade I think I'll put on my Kerosafe and put the green shade on a CQ maybe.  The CQ and AQ sure get bright right after the flooded condition leaves, but slow after a couple seconds.  The green shade may look better on a nickel CQ.  I have four or five CQ's with different finishes.
Duane
IMG_6392_opt.jpg 
IMG_6391_opt.jpg 
IMG_6393_opt.jpg 
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.