200A and 202 reproduction
frames back
in stock.
 My granddaughters father found this Primus #96  in a house he was working on and gave it to me. It looks to be all there.  I read a quick little online and believe it is a kero burner. 
What good info do you guys have on it? 




MilSpecOps #5150

ICCC #1561

hikerduane should be able to tell you all about it. Nice find.
It was Love at first light!!! Scott
It look very similar to my Canadian Coleman Solus.  It is indeed a kero burner, Took me a bit of a learning cure to get going.
shiny DSCN0012.jpg 
Duane has a million of them I think. It only burns kero. Fill tank 3/4 full. Screw down filler cap. Loosen the air valve in filler cap. Fill the cup with alcohol (I used yellow bottle HEET), when the alcohol burns down, screw down the air valve, pump it a couple of times and it should light. Regulate flame but lowering the air pressure with the valve or raising it with the pump.. Much more forgiving then white gas. Usual problem is bad filler cap seal so it won’t hold pressure. There should be a couple of letters stamped on the bottom which are a code date. Google will supply the matrix.

Fun stove, I love them. They, like all stoves will breed like an amoeba, before you know it, 2, then 4, then 104. The trouble with tribbles!
Bet it takes right off.  My Kero burners like that (wish I had a 96) are easy starters.  Duane will be by soon.
Great stoves. Kero burning and not a positive shutoff so you’ll have to preheat with alcohol and then build pressure when alcohol is almost burned out of preheat cup. NRV in the pump tube might need serviced if the spring is weak or rubber pip is hard and will require a NRV tool to remove that valve. I have a couple and like them. You’ll hopefully also like it but if you decide to sell or trade, keep me in mind as I’m always game for another Primus project 😃.
ICCC #1053
hikerduane is our brassie guru around here, and like other have said he'll be along shortly.

That's a real nice find. The box look great and those aren't that common. Only things missing are a pricker tool for cleaning the 'jet' and a meths tin. 
Preheat with a little denatured, once that burns just about out, pump her up some. DO NOT use coleman fuel in it! lol
Its jetted for kero. Use the little screw on top the filler cap to regulate the pressure down for a simmer if desired or for full shut off. 

Most parts can be found thru ebay or clasic camp stoves.
Sears Syndicate # 17
Mil spec Syndicate #0072
ICCC Member #1486
Coleman Blues #134!
Looks good, can't add anything, other experts here, I just have a bunch. Should be a one or two letter date code in a circle on the fount bottom. Most issues with these are hardened cap washer, NRV needs a pip (Primus has the most issues and can be most difficult to remove), orifice on lipstick too large and needs peening. Older ones may have the burner(lipstick) carboned up some. Prime good, closing air release before prime fuel burns off, but not too soon, slowly add pressure once started, minute maybe. If issues with it spitting raw fuel, check brass mesh in burner, clean in vinegar then wire brush clean, check for carbon in burner and fit of bell on the lipstick, should not be very loose it at all, you need thermal feedback so fuel vaporizes. If it burns too yellow, orifice on burner is too large.
Duane-All seasons, year round backpacker and camper.  So many stoves who's counting.
Thanks guys for the info. I'm going to get it cleaned up and see what happens!

MilSpecOps #5150

ICCC #1561

Umm....it's totally worthless. It's best if you just pack it up and send it to this old stovie for umm recycling...yeah..yeah that's it lol  

That is actually a great find and one that is on my list. You'll enjoy it I'm sure
I'm not a collector. I just own many versions of the same item.

Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.