200A and 202 reproduction
frames back
in stock.

Gunhippie
The last time I had to use my Dremel clone for any time at ll, it got so hot I could barely hold it. I decided to buy a pneumatic micro-die grinder to supplement it:

[50030664228_187d5e5bbf_b]

[50031463297_cc8c3b0b4d_b]

Wrong plug for our pneumatic QR, of course. Why do we need a half-dozen different types of these?

Fortunately, I always keep a couple of the right one around, so I got to test it out:

[50031201591_fd95383480_b]

Since the first thing I did with it was to engrave our brewery logo, I think I can get the brewery to pay for it!

Now to see how long it takes to wear it out. At $40, if it lasts a year it'll be a good deal.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Tgarner01
Pretty cool Timm, does it seem to be an air hog?
Toby Garner
ICCC #1939
Quote
Bumpkin 95
I bet that will be handy. 56,000 rpm that little booger is moving.
  • Lee
  • Milspec Syndicate member #1995
  • Like a lantern just hanging out
  • ICCC member #1927
Quote
Majicwrench
I almost bought an old Dremel (to replace mine at the house that the smoke got out of) at an antique store today....lot of bits and cool old Bakelite housing in a wooden case. Shoulda done it.

Hope you enjoy the new toy!
Keith
Quote
Gunhippie
Foredom used to be my dream tool. But the airline to this is more flexible than the cable. I think I'm going to enjoy this tooltoy!
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Gunhippie
Tgarner01 wrote:
Pretty cool Timm, does it seem to be an air hog?


I haven't had a chance to find out yet, but I'm sure it uses less than my full-size die grinder.

There isn't much in the way of instructions or any other info with the tool, as is often the case with MIC stuff. Doesn't even say if it needs oil, so I just assume it does. One drop in the airline every use should do it.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Whitegas Extraordinaire
Yes that needs lubrication, it’s most likely a turbine motor Vs vane style.
Dotco used to offer a 80,000 rpm version.
Be careful as most tooling is not rated for Anywhere near those rpms!
Kevin
I frighten easily!

My current shade is Coleman!!

To me a lamp without a shade is creepy!

ICCC # 1865

Quote
BrianBo
Fun with home dentistry! 🦷
Quote
outlawmws
Wow, this dentistry theme is a recent trend,  on another forum a guy picked up a pair of nasty looking tooth extraction pliers!  three nasty sharp teeth/fangs  (OW!)
[Logo%20Outlaw-half] 
Coleman Blue's 243's #341 - 275 Appreciation Syndicate member 0242
FAS #001 Confusing Future Generations of Collectors, One Lantern at a Time!

“A Human Being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, give orders, take orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook  a tasty meal, fight efficiently, die gallantly.  Specialization is for insects.”            - Lazarus Long


Quote
Gunhippie
BrianBo wrote:
Fun with home dentistry! 🦷


I'll need the angle adapter for that!
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.