200A and 202 reproduction
frames back
in stock.

Gunhippie
[50302106782_f189b1e5b1_b]

Marvel Schebler TSX 765, from a 1953 Ford NAA. Seems my fettling skills are needed for more than GPAs. I'm helping a friend pretty much restore his tractor he uses to mow his field.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Chucker
Oooh fun!

If my Dad were alive and helping with that carb, the first thing he'd ask is, "Got any Indian Head around"?
Chuck
"...we also glory in our sufferings, because we know that suffering produces perseverance; perseverance, character; and character, hope" Romans 5:3-4
Eye-SEE-C-C Member #1333 -- MilSpecOps #003
"Michigan - from the Ojibwa word “meicigama,” meaning “great water.”
Quote
TwoCanoes
That's a nice photo of the carb, but as you know, on this Forum, if there's no picture, there's no tractor.  A Ford Golden Jubilee came with the orchard my folks bought in 1955.  I grew up on that tractor.  NAA is essentially the same tractor.  Sure would like to see a picture . . .  By the way, a friend now owns the tractor that I grew up with.  I get to fire it up and tool around on it from time to time.
Quote
Gunhippie
I don't have any Indian Head around, but I do have Permatex. Waiting for the rebuild kit for now--note no gasket in the carb.

Stewart--This tractor has the Golden Jubilee badge, too. It's about five miles away so I'll get a pic for you next time I'm over that way.

I did the gas tank for it last week. The exhaust manifold was in several pieces, some missing, so we're ordering another of those, too. It's nice that all the parts are still available!
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
TwoCanoes
What's good for the goose is good for the gander.  Here's (what used to be) mine.
TractorSmaller.jpg 
Quote
Gunhippie
We've got a ways to go before ours looks like that! My buddy left the "hood" up when he took the gas tank off for me to clean and seal, and a 60+ mph wind kinda bent it up a bit. May have to take to the body shop to get it straightened out.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Gunhippie
Rebuild kit from Steiner Tractor just arrived!
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
austin65uri
Nice. It's too bad all small engine carbs today aren't as beautiful, simple, and accessible!
Bill.
ICCC#1601
Quote
Sandman
Gunhippie wrote:
Rebuild kit from Steiner Tractor just arrived!
so now theres a michigan connection?

ICCC  #1869
Coleman Quick-lite crew #25
Coleman Blues 243 #158
Coleman 275 appreciation #0232

 

Quote
UncleFred
This is what a modern racing carb looks like.  From Baldwin Racing Engines and 
Willy's Carb & Dyno Shop, LLC.

Carb.jpg 
Everyone's Favorite Uncle
Quote
Banjoman
What parts are you gonna plate Timm
Darrell
Quote
hikerduane
Where's the keg(s) going?  🙂
Duane
Duane-All seasons, year round backpacker and camper.  So many stoves and lanterns, who's counting.
Quote
rob_pontius
Here's one that I finished recently. Its for our farmall MV that is the closest one in the picture. The picture is one that I took of some of the tractors that we get to play with. It was taken a few weeks ago. I finished the carb for an All is Chalmers just a few hours ago. IMG_20200427_203102439_copy_1228x1637.jpg  IMG_20200801_180300239_HDR_copy_768x1024.jpg 
Quote
rob_pontius
Here's a closer picture of the MV. It's one of less than 1600 made.  IMG_20200801_180309796_HDR_copy_768x1024.jpg 
Quote
Sandman
High crop model correct?

ICCC  #1869
Coleman Quick-lite crew #25
Coleman Blues 243 #158
Coleman 275 appreciation #0232

 

Quote
rob_pontius
Yes sir. One of about 50 antique tractors in the stable. 
Quote
rob_pontius
The old tractors are a lot of fun to play with. Timm, you'll enjoy working with that old ford. The old tractors are serious iron. Everything was way overbuilt for their duties back then.
Quote
74HARLEY
Good to see you having fun Timm! 
Old tractors are fun, cool, and still able work when nothing else will! Thank you for sharing.
Joe
looking for 200a 11-56,9-77,2-65 Coleman 275 appreciation syndicate member #0004 ICCC #1262
Coleman Quick Lite Crew #19
Frank appreciation syndicate member #9
Quote
UncleFred
You need to come to Missouri and check out this place that just opened.

https://americantractormuseum.com/
Everyone's Favorite Uncle
Quote
Mister Wilson
The Spartansburg Community Fair has been cancelled this year. First time ever in 99 years. Not even world wars stopped it before. But I digress. I always look forward to seeing all the old tractors running in the parade, and then on display during the week. The Brokenstraw Tractor club is always well represented. The former priest at our church is a John Deere man. At last count, Fr. Tom has five different models. He still comes up and enters them in the parade, never has a shortage of drivers. I’ll miss seeing him and all the wonderful tractors this year. 
John
H.C. Lanterns dealer
Coleman 275 Appreciation Syndicate #2001 A Turd's Odyssey
Canadian Blues #028
Coleman Slant Saver #31
Looking for 6-56 and 6-58 Birthday lanterns.
There's been an alarming increase in the number of things I know nothing about.
Quote
Gunhippie
Yeah, I know someone who has a few tractors, too:

[35994910480_cf872836f1_b]

The view from atop that big ol' steamer:

[35555978454_dc953c3f89_b]
http://www.sunriseironllc.com/


Difference being that the one I'm helping my buddy with will be used.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Vintageish
Not unlike lanterns , it's rewarding to get a nonrunner running again. Then getting it dialed in for peak performance.
Caring for old iron is a tip of the hat to designers and builders of the past.
Though too much commitment to tractors can result in other things not being as well tended.
I hopped in the truck to take a Farmall Cub brush hogging yesterday , and the truck wouldn't start. L.o.l.. No hand crank for back up like the Cub either....
Purty colors. Well , cept'n maybe that brown when it's on fire...
Quote
Whitegas Extraordinaire

Had a friend who restored John Deere’s to show quality. A, B G’s and many more I don’t recall. Unfortunately time has taken his mind. What was wonderful to see is when his collection was being sold all went to collector friends for decent money. When scrap prices went crazy many years ago the amount of iron drug out of hedge rows was amazing. He drove around and bought tons before they were scrapped. He braze repaired all his tin to a point you couldn’t tell. 

Local machine shop used to Babbitt his cranks but sadly time has taken that shop as well. Where it once was is sadly a pawn shop!


I have a two wheel Gravely but it’s modern built in 1977. Can not wait to move to more acreage so I can play again.
Thank you!
Kevin

I frighten easily!

My current shade is Coleman!!

To me a lamp without a shade is creepy!

ICCC # 1865

Quote
Gunhippie
Now I need to make a tool to remove the float valve seat. I think I'll grind down a 7/16" spade bit.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
BSAGuy
I grew up driving a 1953 Golden Jubuilee NAA that my grandfather owned.  I have no idea where he bought it.  We sold it when he died in 1987.  Man, I wish we still had that tractor.

He grew up on a subsistence farm in the teens (born 1903).  His family plowed with a mule and picked cotton by hand.  When we were teens and all full of *$&% and vinegar, he was 73-ish and could still work us into the ground.
- Courtenay
Be Prepared
Quote
Duck
I had an Allis-Chalmers B with a belly mower after I rolled over on that I got a ford 8n with a brush hog. Sold those when I sold the place in NY. I keep telling the wife I want another one

Joe
Mil-SpecOps #0219
Stovie and Damn proud of it


how long does one have to be dead before it’s considered archeology  and not grave robbery?


Quote
Gunhippie
hikerduane wrote:
Where's the keg(s) going?  🙂
Duane


Hmm.... Extra fuel tank?

Darrell--Maybe I'll plate the whole thing! I'm going to need a bigger vat.

Rebuild kit is installed. Now I'm waiting for the new venturi. The original brass one has the seat flange about 2/3 broken off. I could have epoxied it back in (someone in the past had used some kind of gasket maker to seal it back in, but they about half filled the throat with the sealer--I had to burn it out), but Steiner sells a nice Delrin one for about $10.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
Tgarner01
Gunhippie wrote:
Now I need to make a tool to remove the float valve seat. I think I'll grind down a 7/16" spade bit.


Timm can you thread it and use a slide hammer? I've done this in the past.
Toby Garner
ICCC #1939
Quote
Gunhippie
Ah, no problem. I just found a piece of flat stock that fit the slot and it came right out.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.