200A and 202 reproduction
frames back
in stock.
wayne
I just heard back from Sarah at the City of Corsicana and we are set for April 19,20,and 21st at Lake Halbert Park.  Come one, come all.  Hope to see you there! 
__________________
Wayne
Quote
Tex
Very good Wayne thanks for getting it setup.  Tex
Quote
fireball501
Are yall aware that that is good Friday and Easter Sunday?
Iccc # C-061
Quote
wayne
I wasn't aware of that.  I know at our last meeting those dates were suggested. I don't know if the city of Corsicana would give us a different date.  We are probably stuck with those days. Maybe folks could still come Friday and Saturday.
Wayne
Quote
G36rick
Can't make it.. Good Friday and Easter is a big thing with  the family.
ICCC # 1633
Rick Fink
Quote
wayne
I will call Corsicana tomorrow to see if we can get the next weekend.
Wayne
Quote
G36rick
Glad to hear Wayne. I'm not sure if you are on Facebook. Robert Shelton created a dedicated page for us. Quite a few folks were concerned about the date. I am an admin on the page and go back and forth from here to there posting updates on both sites accordingly and when needed.

ICCC # 1633
Rick Fink
Quote
wayne
Ok guys, I just talked to Sarah with the Parks Department and we now have the weekend of April 26,27,and 28.  Maybe this works better for ya.
Wayne
Quote
mikew
wayne wrote:
Ok guys, I just talked to Sarah with the Parks Department and we now have the weekend of April 26,27,and 28.  Maybe this works better for ya.


Fingers crossed that nothing comes up this time!!  Marked in my planner.
Mike
"... at evening time, it shall be light." Zechariah 14:7

Slant Saver #05; Milspec Ops 0045
Quote
wayne
Hope you can make it Mike!!
Wayne
Quote
mikew
wayne wrote:
Hope you can make it Mike!!


Gonna try to get Tdprrp to come with me, too.  I need to unload some stuff that I have multiples of.
Mike
"... at evening time, it shall be light." Zechariah 14:7

Slant Saver #05; Milspec Ops 0045
Quote
G36rick
Glad the dates changed !! Thanks so much Wayne ! :-)
ICCC # 1633
Rick Fink
Quote
ctp51
Thanks Wayne. Looking forward to it!
Tommy P.M. ICCC #1250 With confidence in our armed forces, with the unbounding determination of our people, we will gain the inevitable triumph -- so help us God.   
FDR Dec.8th 1941
Quote
curlyjoe_99
will mark the dates here as well
Robert (AKA Curly)-- Heart-of-Texas! "Keep 'Em Working"  
MILSPEC_OPS & 275 Appreciation Syndicate Member #9999

In Search of (ISO): evidence of a 220/228 series lantern dated 2/63    

Quote
curlyjoe_99
Bumpidy Bump, Bump.
Robert (AKA Curly)-- Heart-of-Texas! "Keep 'Em Working"  
MILSPEC_OPS & 275 Appreciation Syndicate Member #9999

In Search of (ISO): evidence of a 220/228 series lantern dated 2/63    

Quote
HillCountry
We are planning on cooking burgers on Saturday for lunch like we did at the Fall gathering. We might actually figure this all out in advance one day! 😉
Tim - ICCC Member #1217
Quote
curlyjoe_99
ok two options for the decal giveaway

1)
2019 Spring Gathering-Web.jpg 

2)
2019 Spring Gathering-Red-Web.jpg 

Remember these will only be 1-3/4 diameter so a lot of the detail drops to background

I will post on FB gathering page as well and print weekend of the 23rd Feb
Robert (AKA Curly)-- Heart-of-Texas! "Keep 'Em Working"  
MILSPEC_OPS & 275 Appreciation Syndicate Member #9999

In Search of (ISO): evidence of a 220/228 series lantern dated 2/63    

Quote
ctp51
Thank you Robert. Personally, I like the green better.
Tommy P.M. ICCC #1250 With confidence in our armed forces, with the unbounding determination of our people, we will gain the inevitable triumph -- so help us God.   
FDR Dec.8th 1941
Quote
curlyjoe_99
bump

plus wish list for gathering purchase.

looking to complete electrifying several rusted out 220 j-k lanterns for use around the home stead.
in need of:
6 pump well caps (clip on type) can be Boogered with tool marks. do not need pump stem or CV stem
6 fuel 220 series filler caps, any type, does not need to be functional - just threading on to fount to seal from elements.
         O-ring not needed and can also be Boogered with tool marks.

2 j-k valve assemblies with valve stem and knob with lock down nut on generator side- do not need FA or generator.

help me out and i'll bring decals for a milspec, or another item, if i have them ready or time to make a unique one up for you.

Robert (AKA Curly)-- Heart-of-Texas! "Keep 'Em Working"  
MILSPEC_OPS & 275 Appreciation Syndicate Member #9999

In Search of (ISO): evidence of a 220/228 series lantern dated 2/63    

Quote
bandaide
Dang. Going to miss this one. Taking the boys at church camping that weekend. Any less formal get togethers that go on in south/east texas?
Quote
Tex
If anyone is on the facebook groups maybe they can post this gathering info there also
Quote
G36rick
Tex wrote:
If anyone is on the facebook groups maybe they can post this gathering info there also

We have a page that posts both the Spring and Fall gatherings Tex :-)
ICCC # 1633
Rick Fink
Quote
wayne
With three weeks to go, just wondering who plans on attending?
Wayne
Quote
HillCountry
Wayne, I plan on attending and might even bring my tent if the weather looks like it will cooperate. I have that lantern set aside for you that we talked about a few months ago and I will be bringing a bunch of excess to clear off space on my shelves.
Tim - ICCC Member #1217
Quote
ctp51
I am planning on being there.
Tommy P.M. ICCC #1250 With confidence in our armed forces, with the unbounding determination of our people, we will gain the inevitable triumph -- so help us God.   
FDR Dec.8th 1941
Quote
G36rick
I'll be there ! Can't wait ! We will be hanging the new club banner on this gathering as well ! Planning on tent camping (as usual). Gathering some stuff together for the auction too.[sHa_yes2]
ICCC # 1633
Rick Fink
Quote
HillCountry
Rick, would you please post some info to the Facebook page about the gathering so that more people will be aware of the event. Thanks!
Tim - ICCC Member #1217
Quote
G36rick
I thought I already did. I'll check the page and update accordingly. :-)

ICCC # 1633
Rick Fink
Quote
G36rick
Wayne, I just posted for all that are attending to post accordingly. I believe we have at least 12 solid confirmations looking at the "will attend" menu on the page so far.

ICCC # 1633
Rick Fink
Quote
G36rick
HillCountry wrote:
We are planning on cooking burgers on Saturday for lunch like we did at the Fall gathering. We might actually figure this all out in advance one day! 😉


I actually missed the burgers,but did see you cooking...I think I was in awe with all the cool stuff being fired up LOL!
ICCC # 1633
Rick Fink
Quote
G36rick
ctp51 wrote:
I am planning on being there.


You better be there ! Us short guys need to stick together ! LOL ! plus I can't wait to see your new finds !! 

ICCC # 1633
Rick Fink
Quote
wayne
I wonder why they don't post on here?
Wayne
Quote
Tex
I plan to go
Quote
lundmonkey
Do you fellas plan on having any 'Adult Leadership' this year?  If so, tell them to keep an eye on Tim Hayes!  Nice guy, but ... well, you know!!
[sFun_mischieviousbig]
Ed Toner - GA
ICCC #917
  • "We own nothing in this life.  We simply assume possession for an unspecified period of time."
  • "I've never been this old before, and I'll never be this young again."
  • "Never let the facts get in the way of a good opinion!"
  • "75% of the people make up 3/4 of the population."
  • "In two short days, tomorrow will be yesterday"
  • "Enjoy life...it has an expiration date!"
Quote
Duster08
curlyjoe_99 wrote:
bump

plus wish list for gathering purchase.

looking to complete electrifying several rusted out 220 j-k lanterns for use around the home stead.
in need of:
6 pump well caps (clip on type) can be Boogered with tool marks. do not need pump stem or CV stem
6 fuel 220 series filler caps, any type, does not need to be functional - just threading on to fount to seal from elements.
         O-ring not needed and can also be Boogered with tool marks.

2 j-k valve assemblies with valve stem and knob with lock down nut on generator side- do not need FA or generator.

help me out and i'll bring decals for a milspec, or another item, if i have them ready or time to make a unique one up for you.



Welcome to dig through my parts
Jason williams All around collector
Quote
Wc
I plan on being there
Quote
fireball501
I hope to be there ,I am having a heart valve replaced on the 16th ,so it all depends on how well I do with recovery. They are going to do it through my leg so I do not have to have open heart surgery and I am grateful for modern medicine and I am grateful that I am not an automobile so it will not be necessary to remove my head to fix my valve [sHa_yes2].
   
Iccc # C-061
Quote
curlyjoe_99
have the leave time approved and will be there.

afraid that the career has monopolized my time and have no selling materials or projects this time.

if someone wants a specific decal holler now so I remember to bring them.Otherwise, I'll bring the leftovers from previous jobs and see what is what.

got the giveaway decals done 28 small for the lanterns and a dozen for the stovies.  y'all know who ya are.

now I just need to find my gathering stove.  haven't seen it since last fall.   lol

oh don't forget your lampterns!!!!
Robert (AKA Curly)-- Heart-of-Texas! "Keep 'Em Working"  
MILSPEC_OPS & 275 Appreciation Syndicate Member #9999

In Search of (ISO): evidence of a 220/228 series lantern dated 2/63    

Quote
Adventurewagen
Have to work Saturday but hoping to make it up there at least for the evening and Sunday morning.
Quote
mikew
Projected forecast is currently looking like rain in early in the week, moving out by Thursday with good weather for the weekend.
Mike
"... at evening time, it shall be light." Zechariah 14:7

Slant Saver #05; Milspec Ops 0045
Quote
wayne
Yea!
Wayne
Quote
subsite82
I need a burner tube for my QL Lampturn if anyone has one! I can't finish my project without it!! Would a 220 tube work? Any help is appreciated greatly
Joshua Harrington
Quote
HillCountry
Current weather forecast as of Sunday is for Friday/Saturday to be upper 70's and sunny with Sunday sunny and 83. Let's cross our fingers!
Tim - ICCC Member #1217
Quote
HillCountry
Please post your wants/needs and what you are bringing to sell/swap/dump. 😉  I will be bringing the parts horde that I bought from Roy Acuff and some fixer-upper lanterns, some old stoves such as a 425 NL, 417B (late 30's), JC Higgins and a few more. I have a green steel Coleman Model 10 stove stand in the original box that I will be bringing also.
Tim - ICCC Member #1217
Quote
wayne
Tim, is anyone bringing a grill?
Wayne
Quote
subsite82
I'm bringing my propane Road Trip Grill. I've done 15 burgers at a time on it.
Joshua Harrington
Quote
wayne
We might need extra tables.  Bring em if you have em.
Wayne
Quote
mikew
wayne wrote:
We might need extra tables.  Bring em if you have em.


Wayne - PM sent about the gathering.
Mike
"... at evening time, it shall be light." Zechariah 14:7

Slant Saver #05; Milspec Ops 0045
Quote
237 fan
If anyone wants a HGP I have 3 that need a new home. I will bring some CV removal tools and other parts plus various other things, lanterns, stoves, all at good prices.

Mike
Quote
HillCountry
My car is loaded and I plan on being at the pavilion after lunch on Friday. I imagine there will be a few other early birds there before me.
Tim - ICCC Member #1217
Quote
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.