200A and 202 reproduction
frames back
in stock.

12057dave
This belonged to a dear friend/classmates wife’s dad. He and his wife are very generous folks. I gave them a bottle each of homemade Apple and Pear wine in return.  She runs pretty good. The fount is dent free. Cap needs a gasket hence the Green one to get it fired. I think it may become a favorite. Thanks for looking.  Click image for larger version - Name: 626BA342-354E-46FF-BD72-3C106648BEDA.jpeg, Views: 50, Size: 99.73 KB Click image for larger version - Name: FE131F35-8844-4D04-8343-825F01D2D68A.jpeg, Views: 48, Size: 90.44 KB
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
Whitegas Extraordinaire

Nice AGM Dave.
TY

Kevin

I frighten easily!

My current shade is Coleman!!

To me a lamp without a shade is creepy!

ICCC # 1865

Quote
Tgarner01
Nice score👍 do I see a sunrise globe on there?
Toby Garner
ICCC #1939
Quote
12057dave
Thanks Kevin. I’m really liking it a lot.                       Hi Toby. Yes. It is a Sunrise globe. Not original but a nice bonus anyhow. 
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
12057dave
You guys have any idea of what this lantern may be dated? Thanks a bunch. 
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
Tgarner01
I believe when I looked mine up I decided mid 50s?.... Someone should be along to verify
Toby Garner
ICCC #1939
Quote
12057dave
Thanks Toby!!
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
Gunhippie
Model? It would make dating it easier.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote
12057dave
Sorry Timm. Model is 3016. Thanks. 
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
Bill
1940’s to early 50’s I’d estimate for the later 3016’s.  The earlier version had a smaller fill cap.
Bill Sheehy, aka Merlotrin P.M.      ICCC #1390      eBay handle: wtspe
Coleman 275 Appreciation Syndicate #24  /  Mil-Spec Ops, Bernz-o-Matic, and Sears Syndicates #58
Looking for birthday lanterns dated 4/33, 9/33 & 7/86

Quote
12057dave
Thanks much Bill. Appreciate that info! I will pass that along to the previous owner. 
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
arryk
The earliest ones had the small filler, but all the early ones, pre-56 or 57 IIRC, had the coleman style pump plunger with the filler hole.

After that you had a pump plunger with a hex shape and no hole in the center on American sold units, and a pump plunger which was round and no hole on Canadian sold AGM/kamplite, IIRC.

The style of  badging on that one could put it as far back as the mid to late 40s.
Arryk: Newbie but learning
Quote
12057dave
Arryk. Thank you for that additional information. The filler cap is the normal size. I’m going to call it a three piece. Has vent screw. The pump plunger is normal Coleman size with hole. The valve wheel is Red with 5 points and of a Bakelite? material. The burner plate is held down with a vent nut. Don’t know if that is normal. Sorry. I should have put all this info out earlier. Thanks again all for you help. 
Dave                                                       BernzOmatic Appreciation Club #1957
Quote
BSAGuy
Nice score.  Good trade for your homemade wine.
- Courtenay
Be Prepared
Quote
GeraldJP
Great trade!
Gerald

"If we are to have any hope for the future, those who have lanterns must pass them on to others." - Plato
Quote
arryk
12057dave wrote:
Arryk. Thank you for that additional information. The filler cap is the normal size. I’m going to call it a three piece. Has vent screw. The pump plunger is normal Coleman size with hole. The valve wheel is Red with 5 points and of a Bakelite? material. The burner plate is held down with a vent nut. Don’t know if that is normal. Sorry. I should have put all this info out earlier. Thanks again all for you help. 


You're welcome.

Check the globe and clean it carefully, it should say "heat resisting" somewhere if it is the original, or possibly it may be entirely unmarked.

NM, I forgot it was a sunrise.
Arryk: Newbie but learning
Quote
Launchpad95
That is a hard lantern to find.  It looks good, I am glad I was able to learn more about the AGM 3016's. 
Tom 

Quote
Gunhippie
I've found a few 3016s, but always in the burgundy painted brass fount, 3/4 with stress cracks.
It's priceless until someone puts a price on it.
Walk a mile in a man's shoes before you criticize him--then you're a mile away, and he has no shoes.
Texan's last words: "Y'all--hold my beer--I wanta' try sumptin'."
Timm--Middle of nowhere, near the end of the road, Oregon.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.