200A and 202 reproduction
frames back
in stock.

66 Indian creek loop
You know how the fuel knob is broke off on most HGPs you find, I know you can buy a new stem but being tight and a little mechanically inclined, I wondered if any one has brazed a new set of splines on the stub and turned it to the same dia.? The splines  look close to the same as 220 valve. Used to have a buddy that was a machinist, He'd do this kinda stuff for a six pack but he passed on so I'll try it myself 0620201411-00 (1).jpg
jack 
Coleman Quick-Lite crew # 10
FAS#4 Confusing Future Generations Of Collectors One Lantern At A Time
275 appreciation syndacate #0243
Quote
Deanofid
I make them out of 200A valve stems and Warren sells them.  As far as I know he has some still, in case you have trouble with your project.
Good luck!  Sounds like a good plan.
Dean -Midnight Kerosene Ritualist--http://www.deansmachine.com  ICCC #1220.   275 commiseration #0018.
"In Him was life, and His life was the Light of men."  John 1:4
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.