Sportsman globe
Blow out price
Was $19
Now $8
wpnaes
I found one.[sHa_yes2]

Does anyone know the fitting size to connect it to a lp bottle?

Propane3.jpg 

Propane1 (500x369).jpg 
Thanks. Propane5.jpg 



Sean
Coleman 275 Turd Herder #063   Brotherhood of the Traveling Lantern Host #002
Brotherhood of the Traveling Sears Host#001   Sears Collectors Club #004
BernzOmatic Appreciation Club #063   The Coleman Blues 243's #263 MilSpec #0263
Quote
StanDahl
I don't know the fitting size, but the little stove adapter works, check this auction.

ICCC Petty Bureaucrat #CMLXII...
Quote
vette_boy
Sean you lucky duck I've been looking for one of those for a long time !!
Dave

Now ICCC Certified !!!! # 1693 

Just waiting for a power outage
Quote
dpatten
There's not a lot to that.  I bet there would be a smallish market of guys that would buy them if someone built them.
Dennis the Peasant

ICCC Member #1337 (Thanks Dean!)
Coleman 275 Appreciation Syndicate #0086

"One of the sanest, surest, and most generous joys of life comes from being happy over the good fortune of others."
-R.A. Heinlein-
Quote
rangler
I bet there would be too. The question would be whether the time/material costs would result in a retail price that would be considered "affordable".
---Randall----ICCC member #1143---
Quote
wpnaes
A few more pics of the adapter all shined up.  The stamped steel flange is soaking in EvapoRust.  The inside part of adapter is a 2 piece brass unit with a rubber insert that wraps around the needle on the lantern.  The outer part is a simple brass fitting (I need to head to the hardware store to find a male match and connect that to a hose).

The middle is galvanized pipe.  Looks like they used a thread sealer to boot.
Propane5 (375x500).jpg 
Propane4 (500x419).jpg 
5122 adapt (500x375).jpg 
5122 adapt1 (500x375).jpg 
5122 adapt2 (500x375).jpg 



Sean
Coleman 275 Turd Herder #063   Brotherhood of the Traveling Lantern Host #002
Brotherhood of the Traveling Sears Host#001   Sears Collectors Club #004
BernzOmatic Appreciation Club #063   The Coleman Blues 243's #263 MilSpec #0263
Quote
campinut
Make sure the rubber in the adapter is crack free as that would be a cause for a leak. I own #2 of these adapters and it allows me to run both of my 5120 and 5122 off of a bulk tank if needed...campinut...
Like a moth at night, I am attracted to the light!..7/7/1964...Russ, from Missouri..
Quote
wpnaes
Got working on the 5122 again.  When I removed the manifold, broke all 3 screws.  So drilled and tapped for some M4-07 screws and got her hooked up again.  Now just need to build an adaptor/hose for some propane.

5120d (500x375).jpg 
5120c (500x375).jpg 

5120b (375x500).jpg 

5120a (375x500).jpg


Yes Thien, that's your 242 Seafoam lurking; just got a round tuit today! 
Sean
Coleman 275 Turd Herder #063   Brotherhood of the Traveling Lantern Host #002
Brotherhood of the Traveling Sears Host#001   Sears Collectors Club #004
BernzOmatic Appreciation Club #063   The Coleman Blues 243's #263 MilSpec #0263
Quote
wpnaes
Wondering if someone here won the 5122 LP adapter Mike was selling.

https://www.ebay.com/itm/COLEMAN-LP-LANTERN-CONVERSION-KIT-/312464265614?_trksid=p2047675.m43663.l10137&nordt=true&rt=nc&orig_cvip=true

If so, could we get some dimensions on the hose adapter?

Click image for larger version - Name: BB1C783E-15D3-4932-AFFE-F06F0C06C8CA.jpeg, Views: 84, Size: 57.82 KB
Sean
Coleman 275 Turd Herder #063   Brotherhood of the Traveling Lantern Host #002
Brotherhood of the Traveling Sears Host#001   Sears Collectors Club #004
BernzOmatic Appreciation Club #063   The Coleman Blues 243's #263 MilSpec #0263
Quote
warren
That went cheap.

ANTIQUESWV on Ebay
#1 in the 223B club
Gatlinburg, TN

Quote
Chucker
Yeah cheap for a NOS and very uncommon item these days. 
Chuck
"Stop being angry, and forget about getting back at people; do not worry -- it only causes harm." Ps. 37:8
Eye-SEE-C-C Member #1333 -- MilSpecOps #003
"Michigan - from the Ojibwa word “meicigama,” meaning “great water.”
Quote
Nomo reoil
wpnaes wrote:
Wondering if someone here won the 5122 LP adapter Mike was selling.

https://www.ebay.com/itm/COLEMAN-LP-LANTERN-CONVERSION-KIT-/312464265614?_trksid=p2047675.m43663.l10137&nordt=true&rt=nc&orig_cvip=true

If so, could we get some dimensions on the hose adapter?


I've got a full original setup, see my posts for pics, what dimensions are you looking for?

Ryan

Fettle today for a brighter tomorrow!
Quote
wpnaes
Thanks Ryan, I’m looking for dimmensions of the female hose fitting that attaches to the ‘canister adapter’ male end protruding lantern door where the LP can would sit.

I tried Russ’s method without success - see pic below.

It seems a special bevel is needed for a leak free fit. I tried the hose gasket, but still had a leak.




Click image for larger version - Name: 4B11B125-71DB-444E-BD60-38DE73E97FAE.jpeg, Views: 82, Size: 83.61 KB
Sean
Coleman 275 Turd Herder #063   Brotherhood of the Traveling Lantern Host #002
Brotherhood of the Traveling Sears Host#001   Sears Collectors Club #004
BernzOmatic Appreciation Club #063   The Coleman Blues 243's #263 MilSpec #0263
Quote
Nomo reoil
Here's the original female fitting end.  I looked for a way to make this end from purchased parts or find something else that used it with no success. 
The seal is not in the threads but an o-ring. Without this end I think the brass end on the converter would need to be changed to work with a currently available hose fitting. coleman lp hose end.jpg  rsz_img_1070.jpg 

Fettle today for a brighter tomorrow!
Quote
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.