200A and 202 reproduction
frames back
in stock.
GCinSC Show full post »
cjr
Scouterjan wrote:
WOW that's a beauty
Jan


Agree!

Many years ago, I picked up Coleman's pack-away kitchen at an absolute bargain, but I always find myself wanting one with a built-in sink, which would be handy.

Definitely want to keep my eyes open for this older version now, especially since it looks "beefier" and better built. Doubt I'd close it up to use the game boards, but that's still cool.

cjr

Chris

[colemanlanternlogo] ICCC #1615
Quote
bandaide
Started:

20190322_205000_resize.jpg 






I thought I would save myself 999 more words.
Quote
LakeGeorge
Oh, nice! Excited to see the progression and finished piece!
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
bandaide
LakeGeorge wrote:
Oh, nice! Excited to see the progression and finished piece!


My workhorse printer is mid overhaul and don't have a time lapse camera setup on this one. Even though this one is them same type machine, and it runs really well. I was hesitant about using this printer because it has a habit of randomly over-extruding .005 in X or Y, or both sometimes.  It's been a month since I calibrated it last, I hope it comes out right. I'll find out in the morning.  Won't be done till one am and I'm not staying up to watch it. I have a smoke and fire detector in my office incase it fails catastrophically!

Send me a PM Gary with your address so I can get this out to you once it's cleaned up ready.
Quote
rob_pontius
That looks great so far. A lot of work and communication has gone into getting it this far. I hope that it all works out. Great way to come together and make it happen guys. That's why I love this forum. Lots of awesome people here with some great skills.
Quote
johneliot
I too was able to pick one up. All the game pieces, hose was there for only $50. It also still had that blue stuff on it. It was an all day affair getting all that off.

John

“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.” 
― Albert Einstein

Quote
LakeGeorge
Bravo to Bandaide and Gary! The work they did on the sink drain connector was successful! Thanks Gary for the measurements and to Royce for designing the piece on CAD software and then digitally printing it and sending it to me.

Best of all, the custom piece fits! Nice work, guys! Two men I've never met before re-created this extinct piece for a stranger. What can you say but a big, fat THANK YOU!

I love CCF!

Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
dave
That is fantastic
275 Apreciation Syndicate Member #0019 dave !

COLEMAN, AMERICA'S TOP OF SALES LANTERN IN THE USA!!
Quote
GCinSC
Well how about that! A bit of a long shot and a lot of luck. Any chance to see a pic of the adapter? And Bandaide printed it!



Gary, self acclaimed Cast Iron Camp Cook & Tinkerer.
Coleman 275 Appreciation Syndicate #0154
Mil-SpecOps #0308
Quote
LakeGeorge
Here’s the piece: Click image for larger version - Name: DC66BFF1-9891-4959-B473-050BCBCC0DB0.jpeg, Views: 214, Size: 330.83 KB
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
GCinSC
How about that.
Gary, self acclaimed Cast Iron Camp Cook & Tinkerer.
Coleman 275 Appreciation Syndicate #0154
Mil-SpecOps #0308
Quote
bandaide
Now THAT was a successful thread hijack.
Quote
GCinSC
I think a darn fine contribution and collaboration and somebody put a lot more time into designing printing it than I did trying to measure it.


Gary, self acclaimed Cast Iron Camp Cook & Tinkerer.
Coleman 275 Appreciation Syndicate #0154
Mil-SpecOps #0308
Quote
LakeGeorge
I just need to get a hose on it. 1 1/4" ID, it is. I'm thinking about a cheap pool filter hose. Does not need to be very thick or rigid. Boat bilge pump hose would work, too. Pool hose is just much more readily available around here.
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
arryk
LakeGeorge wrote:
I just need to get a hose on it. 1 1/4" ID, it is. I'm thinking about a cheap pool filter hose. Does not need to be very thick or rigid. Boat bilge pump hose would work, too. Pool hose is just much more readily available around here.


You might check the smaller diameter shop-vac hose, it may be what you're looking for.

Also, the way things went from 'missing a piece' to having it in hand is one of the coolest things I have ever seen.
Arryk: Newbie but learning
Quote
LakeGeorge
Scored a 1 1/4' ID 6' pool filter cheapo hose from the local closeout store. It fit perfectly and was so snug I didn't even need a hose clamp on it! Now, we're all set.
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
LakeGeorge
[QUOTE 

Also, the way things went from 'missing a piece' to having it in hand is one of the coolest things I have ever seen.


It sure is cool! Great, great people here, on the forum!
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
rainjer
This looks like the original hose. I need a new hose so I will pick one up and let everyone know.
https://www.lowes.com/pd/EASTMAN-1-5-8-in-x-6-ft-PVC-Bilge-Pump-Discharge-Tubing/1000180583

Visit http://www.rainjersdecals.com for you Coleman direction disc decals and metal signs.

Quote
rainjer
It is 1-5/8” OD, 1-1/4” ID per the spec on it.

Visit http://www.rainjersdecals.com for you Coleman direction disc decals and metal signs.

Quote
LakeGeorge
Then that should fit perfectly. I like how you can trim that one very foot.
Gary Coleman, I am.
I.C.C.C. #1035
11th Annual East Coast Coleman Convention, June 5-9, 2019. Gettysburg, PA
Quote
Scouterjan
Been looking at my new version with no drain in the sink. I am pretty sure a bar sink drain should work with a little mod for a drain hose
Jan
"ebgone bahwagh agi" Harvest Gatherer

Mitakiuye Oyasin " All My Relations"
Quote
rainjer
I picked up the hose from Lowes. I need to dig out the kitchen to see if it will fit. 

Visit http://www.rainjersdecals.com for you Coleman direction disc decals and metal signs.

Quote
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.