200A and 202 reproduction
frames back
in stock.

Newfie
I just broke the NRV spring from my 242k. 

Does anyone know what would work as a replacement for that spring?
Shane Looking for the following Canadian birthday lanterns or lamps: 2-32, 6-34,
Quote
Tgarner01
Pretty sure I used the lightest ink pen spring I could find... Having said that it was not a Coleman pip spring but I'm thinking maybe on a blow torch?... I've forgotten. I only have experience on one Coleman pip (242A) and it seems they were smaller diameter? I do know the stiffer the spring the harder the pump force it will take...I ruined several free ink pens ðŸ˜
Hopefully someone will know what you need for sure
Toby Garner
ICCC #1939
Quote
Newfie
This NRV spring is pretty thin. I knew there was a chance I'd break it when stretching it.

I have a new pip in there but I was getting backward pressure on the pump so I figured the spring needed stretching
Shane Looking for the following Canadian birthday lanterns or lamps: 2-32, 6-34,
Quote
tonywebber45
When the pip is first installed it can leak a bit at first,tank pressure should seal it,also check that the pip isn't touching the inside of the valve body and binding open.
No honey its not another lamp,just parts for one I already have. ICCC #1479
Quote
tonywebber45
Spring from a 200 fuel rod is similar bit heavier but maybe worth a shot.
IMG_20200701_202254.jpg 
No honey its not another lamp,just parts for one I already have. ICCC #1479
Quote
Pancholoco1911
From an euro stove? I used one pip from my euro stove for my SVEA filler cap, I don’t know if they work on Coleman 
~Pancho~
Looking for B-Day lantern 9/83, 7/85

BernzOmatic Appreciation Club #101
Quote
Newfie
I bought a Coleman pip from OCP.
Shane Looking for the following Canadian birthday lanterns or lamps: 2-32, 6-34,
Quote
mgmlvks
There is a fair chance this spring will work

pip.jpg 
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote
Newfie
I couldn't find on OCP's site because I had been searching for NRV, but Mike just emailed me and pointed me to new NRV he sells called rebuildable check valve.
Shane Looking for the following Canadian birthday lanterns or lamps: 2-32, 6-34,
Quote
Mister Wilson
mgmlvks wrote:
There is a fair chance this spring will work

pip.jpg 

+1^^^  I’ve found this spring and pip to be quite versatile in other check valves. Cheap too!
John
H.C. Lanterns dealer
Coleman 275 Appreciation Syndicate #2001 A Turd's Odyssey
Canadian Blues #028
Coleman Slant Saver #31
Looking for 6-56 and 6-58 Birthday lanterns.
There's been an alarming increase in the number of things I know nothing about.
Quote
JimL
Newfie wrote:
I couldn't find on OCP's site because I had been searching for NRV, but Mike just emailed me and pointed me to new NRV he sells called rebuildable check valve.


Got a link?  ‘Rebuildable check valve’ returns no results for me.

-Jim

Flammable liquids, open flame, what could go wrong?


There is a very fine line between hobby and mental illness. - Dave Barry
Quote
SteveRetherford
just type in 242 and you will see all related parts instead of trying to find one part , makes it easier for me anyways .

https://www.oldcolemanparts.com/product.php?productid=1460&cat=&page=2

Check Valve Reproduction
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
JimL
Thanks Steve!  I don’t need one, but was curious and couldn’t find it with ‘rebuildable’.

Edit:  Ah-ha.  It’s not rebuildable, but re-buildable.  :)

-Jim

Flammable liquids, open flame, what could go wrong?


There is a very fine line between hobby and mental illness. - Dave Barry
Quote
SteveRetherford
not like im trying to sell it but i got 3 NOS NRV's in todays mail , part of a parts lot .
[DrSteve2]    Steve , Keeper of the Light !!!
Quote
MYN
Conceptually, those NRVs are similar to those found in many Petromax-styled lanterns. The springs from disposable ballpens would usually work fine. Just select one that fits in. Their tensions usually fall within suitable ranges.
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.