200A and 202 reproduction
frames back
in stock.

mgmlvks
The burner parts were in parts lots at the Jahn/Snook auction.  Never knew that until I got home.  Ready to rebuild to original - just searching for a good fount.  Here are some pics - all of them will be posted here - https://www.flickr.com/photos/46064258@N08/albums/72157714871788581

A ton of "patina", but all the parts loosened up without too much trouble, quite likely disassembled or broken down before.

Really odd lamp - apparently made only one year.  Generator is basically a torch light (packed vertical tube) with a match light top (looped brass tip) feeding into two burners.

This burner assembly has been apart based on how easily it disassembled.  The curved air tube and the down tube appear to be "home made" as it is slightly different than the rest seen on the internet.  The tube may even be aluminum!  The down tube hex is asymetrical, and the notch appears to be so also.  And the air tube is "loose" on the downtube with no way to tighten.  Probably does not affect performance  as this is the air moving into the mixing chamber.

Take a looks - tell me what you think!
[50040612923_f854067a41_z] 
[50041430932_f428340a26_z] 

[50048753841_64d33bcec5_z] 

[50049007917_d8b9c794fe_z] 
[50049010932_ac59f2a8ee_z] 
[50049012337_fa81bdc7db_z] 
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote
Tgarner01
Looks ready for pressurized fuel to me ðŸ‘
Would like to see that one completed
Toby Garner
ICCC #1939
Quote
mgmlvks
May put on a CQ fount assuming threads are right!  The looped gen is pretty much "as found" so hoping for good!
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote
mgmlvks
CQ don't fit.  Need an adaptor.
Mike, ICCC member #1156, Slant Saver Group #011, 275 Appreciation Syndicate #0215, FAS #20 - Confusing Future Generations of Collectors One Lantern at a Time
"In order for the light to shine so brightly, the darkness must be present"
Francis Bacon
(and - for those who have asked - avatar from postcard and says "Coming Home by Rail".  https://c1.staticflickr.com/5/4595/27430282209_39a564be00_z.jpg
 
 
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.