200A and 202 reproduction
frames back
in stock.

While working with the 459 stove, I became curious about the generator. The majority of the stove is the same as the 413G - in fact, the generator even uses the same gas tip & protector. However, the generator has a different part number. So I decided to compare the 459 generator to the 413 generator. It turns out that there is a difference. The 459 generator is simply a shorter version of the 413 generator. It shows in the photos below. In ALL photos, the 459 part is on top and the 413 part is on the bottom.


The 459 tube is 1/4" shorter than the 413 tube.


The springs are exactly the same.


The 459 needle is 3/16" shorter than the 413's.


So, it seems that if one had the proper equipment to thread the tube and the needle, he could make a 459 generator from the 413 generator.


P.S. - The 413 generator was provided by Dana Kennison (JustOneMore). Thank you, Dana!


Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.