200A and 202 reproduction
frames back
in stock.

austin65uri
A near mint 400A that was leaking fuel into the pump chamber from a pin hole or tiny crack in the pump tube bottom inside the tank.  I've had some success in fixing this problem with Caswells, so I gave it a try, but the source of the leak was above where I could slosh the epoxy.  So, I salvaged all the useful parts and decided to take a look inside out of curiosity.
400-2.jpg  400-4.jpg 
Bill.
ICCC#1601
Quote
1hpycmpr
Sorry you couldn’t save the stove but you did cut you loss in half! 
Mark
Quote
MotorcycleDan
Bummer on not being able to save it.

I have a Black 400A and a Brown 400 fount that I will sell if you are interested to get a complete stove again. 
Dan ICCC #900
ICCC Treasure
Quote
austin65uri
Thanks Dan.  I'm sending you a PM.
Bill.
ICCC#1601
Quote
JimL
If you can now find the source of the pinhole leak, you should be able to solder it.    [sSc_hiding]

-Jim

Flammable liquids, open flame, what could go wrong?


There is a very fine line between hobby and mental illness. - Dave Barry
Quote
austin65uri
JimL wrote:
If you can now find the source of the pinhole leak, you should be able to solder it.    [sSc_hiding]

👍
Bill.
ICCC#1601
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.