200A and 202 reproduction
frames back
in stock.

Thedudeinboise
This is the first time I've rebuilt a generator. I watched a few YouTube videos and read the tutorial on this site a while back. I have cleaned the assembly and pulled the cardboard out. This is what I'm left with... 20200810_111054_copy_756x1008.jpg  Is this enough cardboard to reassemble the generator and fore it up? Do I have to put the cardboard in at all with the parts I have already? Do I need to find some copper wire and wrap the pricker assembly?

Thanks in advance.
-Adam
-Interested in anything late '82 or 3/55
-Coleman 275 Appreciation Syndicate #1208
Quote
Sam McCord
If I were doing that generator I would not put the cardboard remnants back in, it will only crumble and plug up tip. OCP sells replacement tubes or you could use the wire wrap method you mentioned. Six of one half dozen of the other in my opinion. Although others will be along to tell you one way or the other is the end all.
Doug

Why is there never enough time to do it right but always enough time to do it over?
Quote
Thedudeinboise
This is all to try and solve a pulsing problem with the lantern. It looks like it caught fire at some point and I'm trying to get it going full bore again. I pulled the fuel valve out and ended up with this. Is there a bushing that disintegrated on me there or is that just crusty buildup from burning bad fuel? 20200810_115428_copy_756x1008.jpg 
-Adam
-Interested in anything late '82 or 3/55
-Coleman 275 Appreciation Syndicate #1208
Quote
Pancholoco1911
Graphite is gone, OCP has replacements for $3 each 
~Pancho~
👀 for BD lantern  7/85, 10/04, 5/11, 2/19
BernzOmatic Appreciation Club #101
“Solo sé que no sé nada”
Quote


...
...
Welcome to the Coleman Collectors Forum, an international forum of Coleman enthusiast and collectors, as such people from all over the world come here to read about Coleman collecting, repair, and to meet and make friends. The pages contained here are intended for the use of amateur collectors and people interested in Coleman collecting, restoration and repair as a hobby. It goes without saying to refrain from political posts, personal attacks and inflammatory posts.

Please note, all postings are the personal opinions of the members posting, the owner, administrators and moderators of the forum do not warrant the accuracy of posted information or endorse the safety of such.